elsner elektronik Suntracer KNX-GPS light Especificações técnicas e instruções de instalação - Página 5

Procurar online ou descarregar pdf Especificações técnicas e instruções de instalação para Estação meteorológica elsner elektronik Suntracer KNX-GPS light. elsner elektronik Suntracer KNX-GPS light 12 páginas.

Imprimir página

Temperature measurements can also be affected by external influences such as by

warming or cooling of the building structure on which the sensor is mounted, (sun-

light, heating or cold water pipes). Temperature variations from such sources of inter-

ference must be corrected in the ETS in order to ensure the specified accuracy of the

sensor (temperature offset).

Magnetic fields, transmitters and interfering fields from electricity consumers (e.g. flu-

orescent lamps, neon signs, switched-mode power supplies etc.) can interfere with or

even cut out reception of the GPS signal.

Wall

pole

Horizontal

2.1.2. Mounting the weather station

2.1.3. Attaching the mount

The weather station comes with a combination wall/pole mount. The mount comes ad-

hered by adhesive strips to the rear side of the housing.

Fasten the holder vertically to the wall or pole.

Weather Station Suntracer KNX-GPS • Date of issue: 30.03.2011 • Errors excepted. Subject to technical changes.

Fig. 1

The weather station must be mounted on a

vertical wall (or a pole).

min.

60 cm

Fig. 2

The weather station must be mounted in the

horizontal transverse direction (horizontally).

Installation and commissioning