elsner elektronik KNX RW Series Especificações técnicas e instruções de instalação - Página 11
Procurar online ou descarregar pdf Especificações técnicas e instruções de instalação para Instrumentos de medição elsner elektronik KNX RW Series. elsner elektronik KNX RW Series 11 páginas. Rain/wind sensor
Imprimir página
DANGER!
Risk to life from live voltage (mains voltage)!
•
With the 230V model, bus addressing via the programming key
should only be done by an accredited electrician.
•
Do not touch any components on the circuit board while pressing
the key.
4.
Maintenance
DANGER!
There is a risk to life from the live voltage (mains voltage)!
If you come into contact with live components in the device, (e.g. caused
also by a jet of water) there is the risk of an electric shock with
230 V devices.
Risk of injury caused by components moved automatically!
The automatic control can start system components and place people in
danger (e.g. moving windows/awnings if a rain/wind alarm has been
triggered while cleaning).
•
Always isolate the device from the mains for servicing and cleaning
(e. g. switch off or remove the fuse).
The device must regularly be checked for dirt twice a year and cleaned if necessary. In
case of severe dirt, the sensor may not work properly anymore.
ATTENTION
The device can be damaged if significant volumes of water penetrate the
housing.
•
Do not clean with high pressure cleaners or steam jets.
Rain/Wind Sensor KNX RW • Status: 19.08.2013 • Technical changes reserved. Errors reserved.
11
Maintenance