Datalogic DS1500-2100 Manual rápido - Página 4
Procurar online ou descarregar pdf Manual rápido para Scanner Datalogic DS1500-2100. Datalogic DS1500-2100 13 páginas.
Imprimir página
SOFTWARE FEATURES
READABLE CODE SYMBOLOGIES
* EAN/UPC
EAN/UPC (including Add-on 2 and Add-on 5)
* 2/5 Interleaved
* Code 39 (Standard and Full ASCII)
* Codabar
Code Selection
Decoding Safety
Headers and Terminators
Operating Modes
Configuration Modes
Special Functions
Parameter Storage
ENVIRONMENTAL FEATURES
Operating temperature (Note 2)
Storage temperature
Humidity max.
Vibration resistance
EN 60068-2-6
2 hours on each axis
Shock resistance
EN 60068-2-27
3 shocks on each axis
Protection class
PHYSICAL FEATURES
Mechanical dimensions
Weight without cable
The features given are typical at a 25 °C ambient temperature (if not otherwise indicated).
Note 1:
If the reader is used in high temperature environments (over 40 °C), it is advised the use of the Beam-
Note 2:
shutter (see the WinHost configuration program) and/or a thermal conductive support (such as the
metal bracket provided).
4
*ACB Readable. Other symbologies available on request.
* Code 93
* Code 128
* EAN 128
ISBT 128
Pharmacode
up to six different codes during one reading phase
can enable multiple good reads of same code
up to four headers and four terminators
On-Line, Serial-On-Line, Automatic, Continuous, Test
• through menus using WinHost utility
• receiving commands from one of the serial ports (HOST
MODE)
ACB (Advanced Code Builder)
Motor Off
Non-volatile internal EEPROM
0° to 45 °C (32° to 113 °F)
-20° to 70 °C (-4° to 158 °F)
90% non condensing
14 mm @ 2 to 10 Hz
1.5 mm @ 13 to 55 Hz
2 g @ 70 to 200 Hz
30 g; 11 ms
IP65
40 x 30 x 22 mm (1.57 x 1.18 x 0.86 in)
44 g (1.55 oz)
DS1500 QUICK GUIDE