CB2 CADET Manual de instruções de montagem - Página 5
Procurar online ou descarregar pdf Manual de instruções de montagem para Mobiliário de interior CB2 CADET. CB2 CADET 6 páginas. Wardrobe
Também para CB2 CADET: Instruções de montagem (5 páginas)
Imprimir página
cadet
WARDROBE
adjustable
shelf
With the assistance of another adult, position unit
upright. Insert 8 shelf pins at desired shelf
heights.
B) Place 2 adjustable shelves into assembled
unit. Make sure shelves are securely supported
13
by shelf pins.
A
B
A) With assistance of another adult, attach hinges
of each door onto side panels of assembled unit as
shown. Secure each hinge with 2 hinge screws.
B) Secure the set screws with a screwdriver as
shown. Refer to Hinge Adjustment diagram for
adjusting the alignment of the door hinges.
15
Assembly is now complete.
Made in Thailand - r05
shelf
pin
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
bumper
Attach 8 bumpers to shelves of assembled unit
14
as shown.
hinge adjustment
If the doors do not appear square or aligned, loosen or
tighten the appropriate screws on each case hinge as
illustrated.
A
B
1
2) Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise.
C
C
3
1) Side to side adjustment:
Loosen screw A, adjust gap
with screw B and re-tighten
screw A.
A
B
2
3) Height adjustment:
Loosen screw C, adjust
door height and re-
tighten screw C.
Page 5 of 6