CB2 Veer Manual de montagem - Página 5
Procurar online ou descarregar pdf Manual de montagem para Mobiliário de interior CB2 Veer. CB2 Veer 6 páginas. Wardrobe
veer
WARDROBE
drawer
left
A
drawer
front
A. Attach left drawer side to drawer front and
drawer back with 4 drawer screws, using a
screwdriver.
B. Fit drawer bottom into grooves of drawer
front/back.
C. Attach right drawer side to drawer front/back
11
with 4 drawer screws.
Repeat steps 11A-C for remaining drawer assembly.
C
rod
B
adjustable
shelf
A
drawer
A. Place 2 drawers into bottom shelves of
assembly.
B. Place 4 adjustable shelves into assembly.
Make sure each shelf is securely supported by
shelf supports.
C. Fit rod onto brackets of left side panel and
13
partition. Assembly is now complete.
Made in Vietnam - r04
drawer
back
B
drawer
bottom
C
drawer
right
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Insert 16 shelf supports into assembly at desired
12
shelf heights as shown. Press firmly to secure.
hinge adjustment
If the doors do not appear square or aligned,loosen or tighten the
appropriate screws on each case hinge as illustrated.
Side to side adjustment:
Loosen screw A, adjust gap with
screw B and re-tighten screw A
A
Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
B
screw A and secure screw B with
a 1/4 turn clockwise
2
Height adjustment:
Loosen screw C, adjust door
height and re-tighten screw C
cleaning & care
Clean surfaces with a dry or damp soft cloth. Do not use abrasive
cleaners. Do not use furniture wax or polish as the unit is finished with
a protective clear lacquer.
A
1
B
C
3
C
Page 5 of 6