Datalogic J Series Manual - Página 2

Procurar online ou descarregar pdf Manual para PDA Datalogic J Series. Datalogic J Series 2 páginas. Ethernet multi cradle
Também para Datalogic J Series: Brochura e especificações (2 páginas)

Imprimir página
Datalogic J Series Manual
CONNECTIONS
Connections should always be made with power OFF!
CAUTION
Ethernet Connection
Connect the Ethernet cradle (Ethernet port 1) to an Ethernet hub or a port on
the host device. Connect the Ethernet cradle (power port) to power supply.
A
C
B
Figure 4 - Ethernet Connection
Key:
A)
Datalogic J Series™ Ethernet Multi Cradle
B)
94ACC4595 FPS18 power supply without power cord
94ACC1150 Power cord EU 3-pin
C)
UTP CAT 5E cable (recommended use)
D)
Ethernet hub
Daisychaining Ethernet Connection
To connect several cradles to an Ethernet network, Ethernet cradles may be
daisychained. It is recommended not to connect more than 4 cradles in order
to maintain the optimal baud rate. The Speed LED and the Link LED on the
Ethernet Port 2 function in the same way as the Speed LED and the Link LED
on the front of the cradle.
To daisychain cradles:
1.
Connect the first Ethernet cradle to power and to the Ethernet Switch as
shown on Figure 4.
2.
Connect power to the second Ethernet cradle.
3.
Connect the daisychain Ethernet cable (either straight or twisted cable
can be used) between Ethernet Port 2 of the first cradle, and Ethernet
Port 1 of the second cradle.
4.
Connect additional cradles as shown in Figure 4.
D
D
A
Figure 5 - Daisychaining Ethernet Connection
Key:
A)
Ethernet hub
B)
Ethernet Port 1
C)
Ethernet Port 2
D)
94ACC4595 FPS18 power supply without power cord
94ACC1150 Power cord EU 3-pin
E)
UTP CAT 5E cable (recommended use).
E
B
C
TECHNICAL FEATURES
Electrical Features
Power supply *
from 12 to 14 VDC ± 5%
Consumption
Max 4.2 A
Indicators
Ethernet Link LED (yellow)
Ethernet Speed LED (green)
Charge time (when PDA is off)
max 2.5 hours (Li ION batteries)
Communication Features
Interface
Ethernet 10/100 Base T
Environmental Features
Working temperature
0° to +50°C / 32° to 140°F **
Storage temperature
-20° to +70°C / -4° to 158°F
Humidity
90% non condensing
Degree of protection
IP20
Mechanical Features
Dimensions
480 x 110 x 190 mm
18.89 x 4.33 x 7.48 in
Weight
about 2750 g / 97 oz
*
Recommended DL power supply: FPS18.
**
Batteries must be charged at a temperature ranging from 0° to 45 °C
(+32° to 113°F).