Datalogic Memor Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para PDA Datalogic Memor. Datalogic Memor 2 páginas. Multi-battery charger
Também para Datalogic Memor: Manual de início rápido (2 páginas), Manual (2 páginas), Manual rápido (2 páginas)
Imprimir página
RS232 CONNECTION
The Datalogic Memor™ Single Ethernet Cradle can be connected to the
host by means of any standard null modem cable. The 9-pin female D-
Sub connector must be connected to the RS232 port of the cradle.
Once the host has been turned on, insert the Datalogic Memor™
mobile computer into the cradle.
A
B
D*
Figure 5 - RS232 Connection
A)
Host Computer
C)
Datalogic
Ethernet Cradle
B)
Null Modem cable
D)
*Power Supply (only necessary
for battery charging)
*
Recommended power supply: 94ACC1324 PG5-30P35 AC/DC
POWER SUPPLY EU/USA PLUG.
Be sure that the switch is in the "USB" position.
During switch operation from USB position to Ethernet
position and vice versa the mobile computer must not be
inserted in the cradle.
NOTE
ETHERNET CONNECTION
Connect the Ethernet cradle (Ethernet port ) to an Ethernet hub or a port on
the host device. Connect the Power jack to a power supply*.
A
B
C
Figure 6 - Ethernet Connection
A)
Datalogic
Memor™
C)
UTP
Single Ethernet Cradle
(recommended use)
B)
Ethernet hub
D)
*Power supply
*
Recommended power supply: 94ACC1324 PG5-30P35 AC/DC
POWER SUPPLY EU/USA PLUG.
Be sure that the switch is in the "Ethernet" position
During switch operation from USB position to Ethernet
position and vice versa the mobile computer must not be
inserted in the cradle.
NOTE
You may need to set the cradle configuration or the
terminal behaviour using respectively the "Cradle
Manager" Windows
"CPCradleCE" Windows CE application. You can
download the "Cradle Manager" installation file and the
NOTE
full "Datalogic Memor™ Single Cradle User Guide" from
C
the
www.mobile.datalogic.com.
TECHNICAL FEATURES
Datalogic Memor™ Single Ethernet Cradle
Electrical Features
Memor™
Single
Power Supply*
Consumption
Indicators
Charge Time
Communication Features
Interface
Baud Rate
Environmental Features
Working Temperature** 0° to +50 °C (+32° to +122 °F)
Storage Temperature
Humidity
Degree of Protection
Mechanical Features
Dimensions
Weight
*
Recommended power supply: 94ACC1324 PG5-30P35 AC/DC
POWER SUPPLY EU/USA PLUG.
**
Battery must be charged at a temperature ranging from 0° to +45
°C (+32° to +113 °F).
D
CAT
5E
cable
XP
application and
the
Datalogic
Mobile
website:
5 VDC ± 5%
Max. 2.5 A
Power on LED (green)
Spare battery charge LED (bi-colored)
Ethernet LEDs (green and yellow)
1000 mAh Battery: max. 3 hours
2000 mAh Battery: max. 6 hours with terminal
inserted, max. 4.5 hours without terminal
RS232, USB 1.1 version, Ethernet
RS232 = up to 115200 b/sec; USB = up to 12
Mb/sec; Ethernet = up to 10 Mbps
-20° to +65 °C (-4° to +149 °F)
80% non condensing
IP50
105 X 75 X 102 mm (4.13 X 2.95 X 4.02 in)
340 g (12 oz)
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed
written approval of Datalogic could void the authority to use the
equipment.
This device complies with PART 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference which may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Datalogic Mobile S.r.l.
Via S. Vitalino 13
40012 - Lippo di Calderara
Bologna - Italy
dichiara che
declares that the
déclare que le
bescheinigt, daß das Gerät
declare que el
DL-Memor Single Ethernet Cradle
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
89/336/EEC EMC Directive
e
92/31/EEC, 93/68/EEC
and
et
und
y
Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla
sicurezza dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and product
safety.
Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité
des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit
und Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad
electromagnética y las Medidas de seguridad relativas al producto.
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con la siguientes normas:
EN 55022 ( C
B ITE ), S
1998:
LASS
EPTEMBER
INFORMATION TECHNOLOGY EQUIPMENT
RADIO DISTURBANCE CHARACTERISTICS
L
IMITS AND METHODS OF MEASUREMENTS
EN 55024, S
1998:
I
T
EPTEMBER
NFORMATION
ECHNOLOGY
EN 55024/A1, O
2001:
I
CTOBER
MMUNITY CHARACTERISTICS
EN 55024/A2, J
2003:
L
ANUARY
IMITS AND METHODS OF MEASUREMENTS
Lippo di Calderara, March 9th, 2007
Quality Assurance Manager
07
emendamenti successivi
further amendments
ses successifs amendements
späteren Abänderungen
succesivas enmiendas
E
QUIPMENT
Paola Chientaroli