Dustless DustBull D1765 Manual do Proprietário

Procurar online ou descarregar pdf Manual do Proprietário para Serra Dustless DustBull D1765. Dustless DustBull D1765 4 páginas. Dust shroud for gas high speed saws

Imprimir página

Saw Specifi c Instructions

For the Husqvarna K970 saw: remove the screws holding the rubber feet on.

Remove the rubber feet, set aside, do not discard. Install the Universal Mounting

Bracket by following the installation instruction on previous page. Use original screws

to install.

For Newer Stihl saw: with round rubber feet. Remove the screws in the bottom

front of the saw. Loosen the rubber feet and slide Universal Mounting Bracket under

the rubber feet. Align the holes in the bracket with the holes where you removed the

screws in the bottom of the saw. Tighten the rubber feet back down and use original

screw if possible to tighten down the bracket. If original screws do not fi t choose the

best screw from the included kit to secure bracket to the saw.

Silica Compliance

The DustBull complies with OSHA's Silica Rule when used in accordance with Dustless

Technologies' objective data available for download on the DustBull product page at Dustlesstools.

com.

Additional Products

1-3/8" BitBuddie

Model #D1900

7" CutBuddie

Model #D1750

DustBuddie Dust Shroud

for Flat Work

Model #D4000

7" DustBuddie XP

Model #D5850

6" Hose

Hepa Wet+Dry Dustless Vac

Model #D1603

5" DustBuddie

Model #D1835

dustlesstools.com

PATENT NO. 5954863 & 5704956