Datalogic Viper CE Cradle Manual do utilizador - Página 15
Procurar online ou descarregar pdf Manual do utilizador para Estação de ancoragem Datalogic Viper CE Cradle. Datalogic Viper CE Cradle 18 páginas.
Imprimir página
CONNECTIONS
3
3 CONNECTIONS
Connections should always be made with power OFF!
CAUTION
The Viper™CE cradle can be connected to a host by means of an RS232 interface,
or an USB interface.
Each connection requires a power supply to be connected to the cradle. We
recommend DL FPS18 power supply.
VEXT
GND
Figure 6 - Power Supply Polarity
3.1
RS232 CONNECTION
A single Viper™CE cradle can be connected to the host by means of a CAB-417
cable. The RJ45 connector must be connected to the RS232 port of the cradle.
Then, it is necessary to insert the power supply plug into the jack on the cradle and
attach the power supply to a power outlet.
Once the host has been turned on, ensure that the Vishay Telefunken driver has
been
activated
by
checking
the
IrDA
port
available
in
\Control
Panel\System\Hardware\Device Manager folder. Finally, insert the Viper™CE
terminal into the cradle.
9