DUTCH IM1.2 Manual - Página 3
Procurar online ou descarregar pdf Manual para Misturador de música DUTCH IM1.2. DUTCH IM1.2 5 páginas. Insert matrix
This is a 100% passive insert section with just relays. Insert 5 is a regular passive insert. With
insert 6 you can swap the order of insert 6 from insert 6 to pre insert 1, so it basically becomes
insert 0. When you push the '6 pre/post' button, this is what will happen:
6 pre/post off: inputs > 1>2>3>4>5>6> outputs
6 pre/post on: inputs > 6>1>2>3>4>5> outputs
Output:
Insert Bypass:
When you press the 'ins bypass' button, all inserts will be bypassed at once. The bypass button
becomes red and all other buttons will be 'greyed out'. This way, the input goes directly to the
output with nothing inline except for some relays.
IM1.1
Bypass offset:
When you push the 'bypass offset' button, it will bypass all inserts and the active gain stage
'bypass offset' comes active. The monitor offset will allow you to change the bypass gain to
make up for the processing of the inserts. This way you can A/B between the analog
processing and level-matched bypassed signal. The gain range is set from -2dB to +8dB done
with a potmeter instead of a stepped switch for a more precise adjustment. And since this is
just an AB function no recall is needed.
IM1.2s
Active output gain:
The output is passive with just relays, but by pushing the 'active gain' button you will enable
the active gain stage which enables you to change the output gain to your liking. In the mid/0
position, there is no gain applied though it passes the active gain circuit. You can change the
gain in 23x0.5dB steps from +5.5dB to -5.5dB with stepped switches.
Rearpanel:
Inputs:
The IM1.2(s) has balanced inputs. Both inputs consist of gold-plated Neutrik XLR's.
Inserts:
The IM1.2(s) has 6 balanced inserts connected on the back with industry standard Tascam
DB25 analog connectors. Each connector holds 2 inserts corresponding with the frontpanel
numbering.