ADE HWZ-30 Manual de instruções - Página 4

Procurar online ou descarregar pdf Manual de instruções para Balanças ADE HWZ-30. ADE HWZ-30 20 páginas. Electronic counting scale

Set up of the scales

1. Carefully remove the delivery contents from the packaging.

2. Place the scale on a stable, horizontal surface. Do not place the scale on a shaky or vibrating

table as this will cause distortion of measurement results.

3. To align the scale, adjust the four feet of the scale so that the air bubble is exactly in the centre

of the spirit level.

4. Remove the weighing platform from the separate packaging and insert it carefully into the holes

on the top of the scale.

5. Connect the power cord to the connector on the bottom of the scale. Switch on the scale. The

on/off switch is located on the right-hand side under the housing. When switching on the scale,

the weighing platform must be unloaded. The scale runs through a test programme and

acknowledges the end of the routine with an acoustic signal.

If the weighing platform is loaded when switching on the scale, the scale will not be properly

calibrated and ready for use.

Switch off the scale and repeat the switch-on process.

6. The scale is now ready for use.

7. For accurate measurement results, the item to be weighed must be placed in the middle of the

weighing platform. The item to be weighed should not protrude beyond the weighing platform.

No.:

Designation

Weight

Unit weight

"Numeric keypad"

"Spirit level"

Count

"Comma key"

Recharge

"Function keys"

Description

Weight window

Unit weight window

0 ~ 9, for data entry to manually enter a value for tare

weight and sample size

For levelling the scale

Quantity window

For setting decimal places

Indicates the charging process of the battery

Used to trigger predefined functions

Used to delete incorrect entries or to return

HWZ-190214-Rev006-UM-en