CBT Supply flipIT RIMLESS Manual de instruções de montagem - Página 7

Procurar online ou descarregar pdf Manual de instruções de montagem para Ambiente de trabalho CBT Supply flipIT RIMLESS. CBT Supply flipIT RIMLESS 12 páginas. Convertible computer workstation

Imprimir página

Check and set the microgap

Inspect the microgap to

make sure it is even on all

sides. Set this in position

now by tightening the

short bracket all the way.

Refer to step 2, simple arm.

4. Install gas spring cylinder

use a flat blade screwdriver to remove the locking hubs, then press

the black barrel end of the cylinder onto the arm mounting post.

Leave the silver shaft end uninstalled.

Press the locking hub into place to finish the installation.

5. Install VESA mount

FIK19R Rimless flipIT ® by SMaRTdesks®

use three Euroscrews

to install the VESa

bracket.

Most monitors use

the second from the

top position for bal-

anced operation.

your monitor should

clear the rest by 1/2"

or less. Choose the

set of pilot holes that

fits your monitor.

www.smartdesks.com

800-770-7042