Datapath VSN1192 Manual de início rápido - Página 11

Procurar online ou descarregar pdf Manual de início rápido para Controlador Datapath VSN1192. Datapath VSN1192 20 páginas. Wall controller

If you chose to have the DDCT configure your wiring, this page will display the

recommended display connections, as shown above. Connect each display to the

corresponding output connector on the rear of the VSN wall controller. The printed

input/output diagram shipped with the your VSN wall controller shows where the

display connectors are located on your system. If your VSN wall controller is

connected to a printer, you can print a copy of the wiring diagram using "Print a

Wiring Diagram".

Note: The Datapath Diagnostic Suite must be installed to print a wiring

diagram. The suite can be downloaded from the Datapath website downloads page

should it not already be installed on your system.

To manually select the outputs right click on the display group and select "Edit", you

can then select each individual display and allocate your preferred output. Right

click on a selected display to reveal the list of outputs available:

When all outputs have been allocated by either "Recommended" or "Custom" click

on "Finish". You will then be prompted to save the changes to your video wall and

restart your system. When restarted, the Windows Desktop will be displayed across

the wall.

You can access the configuration tool at anytime should you wish to make changes.

Right click on the desktop and select Display Driver Configuration Tool from the

menu.

Page 11