Datapath VSN870-RPSU Manual de início rápido - Página 10

Procurar online ou descarregar pdf Manual de início rápido para Ambiente de trabalho Datapath VSN870-RPSU. Datapath VSN870-RPSU 14 páginas.

Step 4

Switching on the Vision800

Ensure that the Power Supply Unit(s) are switched on

Press and release the main power switch

The BIOS and boot messages will appear on the Control Screen that is plugged into the VGA output socket

on the SBC

(Fig.3 -

S4).

When the system has booted the Windows® "Splash Screen" is displayed on the Control Screen.

Complete the Windows® setup procedure to select language, user account details and computer name.

You will be prompted for the Operating System Software Key, this is located on the Operating System CD

case in the Accessories pack.

Once the account has been set up, the Control Screen and Display Wall will open into a Windows®

desktop.

The Vision800 has pre-configured factory settings for the wall layout and screen resolution. These settings

can be changed using the TWIN tab accessed from the Display Properties dialog. To access the TWIN tab

right click on the desktop and select Screen Resolution, the following dialog is displayed:

This dialog shows the Control Screen as the Primary Monitor (1) and the display wall as the Secondary

Monitor (2).

To access the TWIN Properties tab, highlight the Secondary Monitor by clicking once inside the box and

then selecting Advanced settings (Fig.13).

(Fig.3 -

P2).

(Fig.2-

F3).

Fig.13