Dataplex OPTO-SPLITTER Manual - Página 12

Procurar online ou descarregar pdf Manual para Conversor de multimédia Dataplex OPTO-SPLITTER. Dataplex OPTO-SPLITTER 20 páginas.

OPERATION

RDM /DMX SERIAL LINK

OPTO-SPLITTER 1

8 XLR

1—Connect the 5-pin male connector of a DMX cable to the 5-pin female output connector of the lighting console.

2—Connect the female end of the DMX cable coming from the lighting console to the 5-pin male input connector

of the Opto-Splitter 1x8 XLR.

3—Connect additional DMX cables to output connectors of the Opto-Splitter Mini 1x5 RDM and link them to

fixtures, daisy-chaining as necessary.

Note: When using RDM enabled Opto-Splitters, ensure all linked devices support RDM. Some DMX receiving chips

are not able to process an RDM signal, causing the device to behave erratically. If a problem occurs contact your

device manufacturer.

DATAPLEX DEVICES—Opto-Splitters User Manual v1.2—09122020