Duux Mistral Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Desumidificador Duux Mistral. Duux Mistral 16 páginas.

3. Functions

Note: see product overview (chapter 1) for

reference.

Control panel

Use the control panel to adjust the settings.

Hygrostat button

Press to increase the desired humidity with

intervals of 5% for each press. The hygrostat

can be set from 40- tot 80% RH (relative

humidity). When the set humidity dissapears, the

display shows the ambient humidity in the room.

Note: when disconnecting the power cable, the

hygrostat setting will automatically reset to factory

pre-set.

Power button

Switch the device on and off by pressing this

button.

Status indicator LEDs

•

Running – indicates the device is extracting

moisture. When the ambient humidity reaches

below the set humidity, the running status

indicator will turn off to save power.

Attention: If the running status indicator is

blinking, it means that the ambient temperature is

below 0⁰C or above 40⁰C. Please adjust temperature.

•

Full – this indicator will light up when the water

tank is full or removed from the device. Please

empty the water tank or place it in proper

position.

•

Defrost – indicates the device is defrosting.

Note: If the defrost indicator is blinking, it means

the humidity and/or temperature sensor(s) are cut

off or made short circuit.

Timer button

Use this button to activate timer modes.

Press once – activate 2 hour time-out (2hr timer

indicator LED will light up);

Press twice – activate 4 hour time-out (4hr timer

indicator LED will light up);

Press three time – activate 8 hour time-out (8hr

timer indicator LED will light up);

Press four times – deactivate timer.