Dux ProFlo series Manual do Proprietário - Página 7

Procurar online ou descarregar pdf Manual do Proprietário para Aquecedor de água Dux ProFlo series. Dux ProFlo series 16 páginas.

Owner's Manual – Proflo Electric Storage Water Heaters

Electrical Connection

This water heater is designed for

single phase 240V A.C. supply

only. The electrical connection must

comply with Local Supply Authority

Regulations and AS/NZS 3000.

Connections are made at the terminal

block inside the water heater, and

a means for disconnection must be

incorporated in accordance with the

wiring rules.

Entry to the connection area is through

the hole beneath the electrical cover,

designed to accept a 20mm conduit.

The electrical cover may be removed by

undoing the two screws on the cover

and sliding the cover downwards to

disengage the top edge. Ensure that the

conduit entry is well sealed to achieve

correct weatherproofing.

Note: This water heater is fitted with

a thermostat and over-temperature

energy cut-out. Under no circumstances

should the water heater be operated

without both these devices being in the

circuit. Replacement must be carried

out only by a qualified electrician or the

manufacturer.

H0421

0421

Rev. K

Danger: The operation of the thermal

cut-out indicates a possibly dangerous

situation. Do NOT reset the thermal

cutout until the water heater has been

serviced by a qualified person.

Caution: Water heater must be filled

with water before turning on the

electricity supply.

Electrician: Press the reset button on

thermostat to ensure over-temperature

cut-out is set.

When supply wiring has been connected,

supply wires must be kept lower than the

terminal block.