Dataradio DL-3282 Instruções de configuração - Página 3

Procurar online ou descarregar pdf Instruções de configuração para Modem Dataradio DL-3282. Dataradio DL-3282 4 páginas.

Table 4 DIP SWITCH S101 SETTINGS

DIP Switch S101

(0=Off, 1=On)

* Factory Settings.

Table 5 SWITCH S101 NORMAL/CONVENTIONAL MODE OPTION SETTINGS

DIP Switch S101

(0=Off, 1=On)

* Factory Setting

Table 6 SWITCH S101 TEST MODE SETTINGS

DIP Switch S101

(0=Off, 1=On)

Normal Mode

Loopback Mode (Test Mode)

Conventional Mode

Bell 202 Mode

Bell 103 Mode

Active High Squelch Detect

Active Low (Inverted) Squelch Detect

Bell 103 Originate Mode/Bell 202 Half-Duplex Mode

Bell 103 Answer Mode/Bell 202 Full-Duplex Mode

FSK Mode (Audio from and to the Modem IC is not routed through the filters on board).

This Mode is to be routed into an FSK/Audio Port of the Radio.

WB Mode (Audio from and to the Modem IC is routed through the audio filters on board).

This Mode is to be routed into a Wide Band Port of the Radio.

Time between activating RTS to activating Clear-To-Send (CTS) = 30 ms.

Time to debounce Soft Carrier Turnoff (SCT) at end of transmission = 25 ms.

Time between activating RTS to activating Clear-To-Send (CTS) = 60 ms.

Time to debounce Soft Carrier Turnoff (SCT) at end of transmission = 50 ms.

Time between activating RTS to activating Clear-To-Send (CTS) = 180 ms.

Time to debounce Soft Carrier Turnoff (SCT) at end of transmission = 75 ms.

Time between activating RTS to activating Clear-To-Send (CTS) = 240 ms.

Time to debounce Soft Carrier Turnoff (SCT) at end of transmission = 100 ms.

A Simulated Un-Asserted RTS Line from the RS-232C Connector (Un-Keys the transceiver).

A Simulated Asserted RTS Line from the RS-232C Connector (Keys up the transceiver).

Transmit Data from the RS-232 Port.

Transmit Mark Tone.

Transmit Alternating Mark/Space Tones.

Transmit Space Tone.

Function

Part No. 004-3282-004