Aus Electronics Direct HDEX0021M1 Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Extensor Aus Electronics Direct HDEX0021M1. Aus Electronics Direct HDEX0021M1 8 páginas. 200m hdmi wireless extender

Imprimir página
FAQ:
Before power on, pls check the connection line carefully. And make sure that
all interfaces are normally connected. The common trouble shooting way
shows below:
No.
Problem
1
No display
Display
2
"Connecting"
Display
3
"No signal"
Transmission
4
distance is short
Screen not fluent
5
Can't find
6
the SSID
Can't login to
theWeb settings
7
interface
DescriptionSolutions
1. Check the TV is on and has been connected
with the machine.
2. Please check the TX power supply
3. Make sure the TV is working regularly
1. Please check the RX power supply
2. Please check the WEB are set correctly
3. Co-channel interference. Pls select a new
channel
4. Pls reset or turn off the power restart
1. Check the signal source is power on and
output normal.
2.
Check the signal source output resolution.
3.
Make sure the HDMI cable is properly
connected
1.
Please adjust the angle of the antenna or
adjust the placement
2.
Concrete walls, Brick, Wallpaper, Metal,
Bulletproof glass willshorten the signal
cover range or cause big signal loss.
3. Co-channel interference. Pls select a new
channel
1. Please adjust the angle of the antenna or
adjust the placement
2. Co-channel interference. Pls select a new
channel
1. Please check the RX and TX power supply
2. Please check whether the Phone/PC
supports 5G band
3. Factory default or turn off the power restart
1. Please check the RX and TX power supply
2. Please check the IP type of mobile phone/PC
is Auto
3. Please check the IP is in 192.168.1. XXX
address range
4. Please try Login again after changed a browser
8