DataRemote VAB-1 Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Router de rede DataRemote VAB-1. DataRemote VAB-1 15 páginas.

Step 1 – Unpack the package

Take the VAB-1 device and related accessories out of the box.

Step 2 – Attach cellular antennas

Attach the two cellular antennas to the

VAB-1 device by using the 2 SMA connectors

Step 3 – Connect broadband ethernet

If you have broadband Internet service, attach an ethernet cable from the red WAN port on the back of the VAB-1

device to one of the LAN ports (usually yellow) on your broadband modem/router. This will help ensure you will

have the best service possible.

WAN Port for upstream router devices

Step 4 – Connect power supply

Attach one end of the power supply to the POWER Input port

on the back of the VAB-1 device, and the other end into a USA

120V/60Hz wall power outlet.

Step 5 – Check cellular signal strength

Check the cellular signal strength indicator on the front of the VAB-1 device. If you don't see one or more green

bars of signal strength, try moving the VAB-1 to a higher floor (and/or closer to a window).