4ms Spectral Multiband Resonator Instalação do firmware - Página 10
Procurar online ou descarregar pdf Instalação do firmware para Equipamento de gravação 4ms Spectral Multiband Resonator. 4ms Spectral Multiband Resonator 13 páginas. Firmware version 5 new features summary
Imprimir página
more exponential. However, the BPRe filter type cannot be tracked 1V/octave. Thus the Freq jacks and Freq
Nudge knobs do a linear frequency shift (will not track to external gear if tuned with the jack or knob).
To change filter types, enter System Mode and turn the Odds Freq Nudge knob all the way down. Then rapidly
turn it all the way up and the all the way down. This will toggle between Two-Pass and One-Pass mode. When
in One-Pass mode, you can rapidly turn the Evens Freq Nudge knob in the same way to toggle between One-
Pass and BpRe mode. When the mode is changed you will hear the audio output change, so listen carefully.
There is no visual indication of what mode you're in, but you can easily tell with two quick tests:
1) Unplug the IN jacks and turn Q slowly from 0% to 100%, if you hear the white noise in the background
disappear around 90-100% then you are in Two-Pass Mode; if it never goes away completely, you are in One-
Pass mode.
2) Input a 0-5V triangle wave into one of the Freq jacks: if you hear the pitch of one or more channels go up 5
octaves then you are in Two-Pass or One-Pass; if you hear the pitch bend by less than an octave then you are
in BpRe.
Summary of Advanced control settings
10
Transpose channel -6 to +6 semitones
Channel Lock + Evens/Odds Freq Nudge
(red/blue lights show amount of transposition)
Hold all six Locks for 2 seconds to clear Transposition
Forbid Note (that the channel is currently assigned to)
Channel Lock + tap ROTATE knob
(note on the light ring goes dim)
Press all six Locks + ROTATE to clear Forbidden notes
Q-Lock (locks the channel's Q value)
Channel Lock + turn RES (Q)
(Lock button blinks)
1V/Octave output mode
Hold down ROTATE while flipping switch to Fast
(Env Outs jacks output 1V/oct CV)
Pre/Post selects Glissando On/Off
Change scale banks
Hold down ROTATE while turning
(lights show color of current bank, see back page)