DV Mark DV MICRO 50 JAZZ Manual do Proprietário - Página 6
Procurar online ou descarregar pdf Manual do Proprietário para Amplificador de instrumentos musicais DV Mark DV MICRO 50 JAZZ. DV Mark DV MICRO 50 JAZZ 11 páginas.
Imprimir página
REAR PANEL
15) AC POWER SOCKET Make sure the unit is grounded; all three terminals of the AC power plug must be connected to avoid any injury to the user
.
or damage to the unit
16) VOLTAGE SELECTOR The DV MICRO heads feature a 120V/240V Voltage Selector to use the amp in countries with different voltages,
so make sure the switch on the rear panel is on the correct voltage before connecting it to the AC power, and the fuse is the right value for that
voltage (not available on the 100V version manufactured for Japan).
Please change the voltage/fuse values label located near the voltage selector matching the voltage/fuse values when you need to change the
voltage of the unit.
17) FSW 1/4" MONO jack for connecting a SINGLE
footswitch to switch between Clean and Lead
channels.
18/19) SEND/RETURN The send/returncan be
used for connecting with outboard effect processors
or pedals. Simply connect the Send out to your
processor's input, and connect the output of your
processor to the Return in.
20) SPEAKER OUT The two speaker ouputs
provided for speaker cabinet connections are wired
in parallel and total minimum impedance load for the
amp is 4 ohms, so you can connect one or two 8 ohms speakers or only one 4 ohms speaker.
Use speaker cable (not instrument cable)..
6
- DV MICRO 50 II - DV MICRO 50 M - DV MICRO 50 CMT
Clean
―
Overdrive
Input
6
7
12
Drive
Bass
Overdrive
Aux
Clean
Level
1
11
2
VOLTAGE
16
17
15
DV MICRO 50
8
9
Hi
Level
Bass
Mid
4
3
FSW
RETURN
SEND
18
19
JAZZ
JAZZ
Reverb
Off
1
On
DV Micro
Phones
50 CMT
Hi
5
13
CLASS 2 WIRING
SPEAKER OUT
MIN LOAD 4Ω
20
20
6
6
9