DV Mark Over Marker Manual do Proprietário - Página 4

Procurar online ou descarregar pdf Manual do Proprietário para Pedal de música DV Mark Over Marker. DV Mark Over Marker 8 páginas.

4. FUNCTIONS OVERVIEW

OVER-D (1) – adjusts the amount of distortion.

LEVEL (2) - controls the overall effect volume, so you can match the distortion level to the clean volume when switching the

effect on and off, or set the amount of boost you want the pedal to cause.

TONE 1 (3) - controls the frequencies from 200 Hz to 2.5 kHz. Turning this knob up will result in brighter distortion tone; turning

it down will make the distortion darker.

TONE 2 (4) - cuts from 0 to - 20dB at 800 Hz. This control removes mids from your distortion tone.

ON/OFF SWITCH* (5) – turns the effect on and off; the LED indicator illuminates when the effect is on.

*TRUE BYPASS - When the pedal's controls are 'off' , your signal goes directly from the input jack to the output jack

without any degradation of audio quality

5. CONNECTIONS

1/4" INPUT JACK (6) - (CONNECTS TO YOUR INSTRUMENT) As with any pedal, make sure your amp is off and the volume is

turned down before making connections.

1/4" OUTPUT JACK (7) - (CONNECTS TO YOUR AMPLIFIER)

DC IN (8) - External power supply connection (9-12V DC PSU).

STANDARD 9 V BATTERY COMPARTMENT (9) - Use a Phillips screwdriver to unscrew the two screws to access the 9 V battery

compartment on the bottom side of the pedal.