4ms Company Spherical Wavetable Navigator Folha de consulta - Página 3

Procurar online ou descarregar pdf Folha de consulta para Sintetizador 4ms Company Spherical Wavetable Navigator. 4ms Company Spherical Wavetable Navigator 4 páginas. Channels, vcos, navigation

Imprimir página

Spherical Wavetable Navigator Cheat Sheet #3: Sphere Recording Mode

Enter Sphere Recording mode

Press Depth + Latitude + Longitude.

Press again to exit without saving.

Use Preset knob to save changes.

Start Recording

Press red button to start

recording audio from

Waveform In jack.

Automatically stops when

done (about 2.5 seconds).

Monitor Recording

Press green button to monitor

signal on Waveform In jack.

Tune to Test Tone

Press Fine + green button to

output a test tone (86.13Hz)

mixed with signal on Waveform

In jack. Useful for tuning audio

source by listening to "beats".

Waveform In Jack

Patch audio source here. About

2.5 seconds of audio can be

recorded and turned into a

spherical wavetable.

Save Sphere

When ready to save, turn knob

to select a sphere slot. Press

and hold knob until blinks red,

then press again to confirm

save. Recording mode will exit

automatically.

LFO OUTs: synchronized ramps and triggers while recording

A: Ramp up for entire duration of recording

B: Eight ramps for duration of recording

C: One ramp per waveform

D: Trigger at start of recording

E: Trigger per sphere recorded (27 waveforms)

F: Trigger per waveform recorded

FX Buttons

Press FX button(s) while turning Browse to apply effects to the current waveform.

Press button(s) while push+turning Browse to apply to all waveforms in the sphere.

Press button(s) while turning Depth, Latitude or Longitude to apply to one

dimension.

Effect amount will display on the light ring as you turn.

Press Fine while turning to apply effects by smaller amounts.

Effects:

Wavefolding

Decimator

Metalizer

Octave

Scale

LFO OUTS

Gain

Waveform

Save Preset

Dispersion

Waveform Browse

Turn Browse to preview the 27 waveforms in the current sphere.

Hold Fine to morph between waveforms.

What is Sphere Recording mode?

You can create and save your own 3-dimensional wavetables ("spheres") on the

SWN using Sphere Recording mode. Patch your audio source into the Waveform

In jack and press the red button to record 2.5 seconds into the recording buffer.

Use Waveform Stretch, Spread, and Shift to select waveforms from the buffer,

and apply any combination of effects to any or all of the waveforms. Browse and

Navigate to preview your work and save it when you're done!

Lowpass

Level/

Filter

Normalization

smoothness

Fine

Browse

Dispersion Pat.

Sphere

Waveform Stretch

Seam

Press Octave while pressing

and turning Browse to stretch

each waveform within recording

buffer. Overall effect is to lower/

raise pitch by octaves. Red/

Green/Blue light pattern on light

ring will stretch wider or more

narrow.

Hold Fine to fine tune stretch.

Spread

Waveform Spread

Press Transpose/Spread while

pressing and turning Browse to

spread waveforms throughout

recording buffer. Red/Green/

Blue lights on light ring will

spread further or closer.

Hold Fine to spread by smaller

increments.

Phase

Waveform Shift

Press and turn Browse to shift

the waveforms around

recording buffer. Red/Green/

Blue lights will wrap around the

light ring.

Hold Fine to shift by smaller

increments.

WT Spread

Depth/Latitude/Longitude Navigate

Turn these knobs to browse the

sphere in one dimension at a

time, playing each waveform

without morphing between.