ADE M25611 Manual de operação - Página 4

Procurar online ou descarregar pdf Manual de operação para Balanças ADE M25611. ADE M25611 8 páginas. Electronic handrail scale

Your ADE scale is a quality product. In order to achieve best possible results please read and follow

strictly the instructions of this Operating Manual:

Weighing platform

3 stainless steel columns

Upper part of handrail with display mounted and cable plus male plug

Assembling material (4 adjustable feet)

Mains adapter

Operating Manual

Unpack the carton contents and follow the assembling advices as follows:

Turn platform and place on the ground up side down.

Assemble the four adjustable feet into each hole in the corners of the rear platform.

Turn platform round.

Screw two of the stainless steel columns onto each screw in both edges of the platform.

Insert the cable with the male plug attached to the upper part of the handrail into the third

stainless steel column and gently pull it out. Connect the male plug to the female connector

which you find inserted in the hole close to the back side edge of the platform.

Now connect the third column by screwing it over the connector and make sure it is securely

tightened

Insert the three bars of the upper handrail with indicator into the three columns and press

them down until there is no gap to be seen.

Assembling is completed.

Attention: Due to packing and transport you may find the upholstery of the railing slightly distorted.

This will however disappear shortly after set up.

Power supply of the scale: By mains adapter (12V 300 mA) and rechargeable batteries

The display is already equipped with rechargeable batteries.

To charge the power-pack for the first time please use the mains adapter.

Complete first charging needs 24 hrs.

Place the scale in its working area.

Make sure to place the scale on an level surface.

The scale is now ready for use.

Installation and use of scale

050100-Rev000-M25611