ADE M25611 Manual de operação - Página 7
Procurar online ou descarregar pdf Manual de operação para Balanças ADE M25611. ADE M25611 8 páginas. Electronic handrail scale
Imprimir páginaHOLD function
By using the HOLD function the identified weight might be stored and is shown on the display even if
you stepped already off the scale. The advantage is to take care of the patient first and then take note
of the weight.
-
Press HOLD/BMI key while scale is under load.
-
The display shows a blinking arrow symbol next to the HOLD symbol.
-
Once the scale is loaded with more than 3 kg the blinking stops.
-
The weight displayed will now also show after unloading of the platform.
-
To deactivate the Hold function press again HOLD/BMI key.
-
If you are in Hold mode you might also change over to the Tare function by pressing the
TARE key which means both functions might be used simultaneously.
Cleaning
Before cleaning make sure the scale has been disconnected from the socket.
For cleaning just use a damp cloth or common disinfection fluids.
Do not use any aggressive cleaning fluids.
Make sure no water or cleaning fluids is penetrating the scale.
Your ADE scale is equipped with a mains adapter and rechargeable batteries.
If the display shows the symbol `Low´ the power pack needs to be recharged by using the adapter.
Safety Check
Do NOT use the scale
•
If the mains adapter shows visible damages.
•
if the mains adapter is not working properly any more
•
After long storage in humid places
Please contact your dealer or service partner in those cases.
Storage and Transport
Please keep all original parts and pieces for an eventual sending back of the scale
in order to avoid any possible damage during transport which automatically leads to non warranty.
Disconnect all cables before transport and avoid unnecessary damages.
Warranty – Liability
ADE will repair or replace this product within a period of 2 years from date of delivery applying to
defects occurred due to poor material or workmanship (presentation of invoice is necessary). All
moveable parts – batteries, cables, mains units, rechargeable batteries etc. – are excluded. Warranty
does not include natural wear, damages caused by incorrect or negligent handling, overuse or
unsuitable or improper storage. The cost of transport will be borne by the customer should the
equipment be located anywhere other then the customer's premises. In the event of transport
damage, claims under warranty can be accepted subject to using the complete original packaging and
the equipment secured the way it was packed and secured originally. All the packaging should
therefore be retained.
050100-Rev000-M25611
Cleaning and Maintenance
6