DV8 OFFROAD RBJL-12 Manual de instalação - Página 12

Procurar online ou descarregar pdf Manual de instalação para Acessórios para automóveis DV8 OFFROAD RBJL-12. DV8 OFFROAD RBJL-12 13 páginas. Jl mid width rear bumper

INSTALLATION
MANUAL
STEP 23 |
Align the bumper left-to-
right and up-and-down. Check the wings
to ensure neither are touching the body of
the vehicle.
The bumper should be sitting level on the
vehicle and there should be consistent
gaps between the wings and the body of
the vehicle.
When fitted properly secure the hardware
holding the bumper to the mounting
brackets using a 16mm socket.
STEP 22 |
Adjust the in-and-out
position of the bumper ensuring there
are consistent gaps between the bumper
and vehicle, and that the bumper is not
touching the vehicle.
Secure provided M12 hardware on the
bottom of the frame rail using a 19mm
socket.
Finish securing all facotry
hardware using a 18mm or 21mm socket.
Torque factory hardwareto 66 ft-lbs.
Note: The tool required may vary based on trim.
NEED HELP?
855-680-9595