Datasheen KvmSwitch! CS16C Manual do utilizador - Página 8
Procurar online ou descarregar pdf Manual do utilizador para Interruptor Datasheen KvmSwitch! CS16C. Datasheen KvmSwitch! CS16C 8 páginas. Usb & ps/2 auto kvm switch
Imprimir página
Cascade (Master/Slave) Configuration
You can connect a second level of one or more Auto Multi-PCs Controller to "PC1~PC6"
or "PC1~PC8" ports of a Master unit. Cascade configuration expands system ability
allowing you to select computers connected to the Master or Slaves. There is only one
Master, which has a mouse, a keyboard and a monitor connected to its CONSOLE port
directly operated by a user. Once connected, automatically configure themselves to
otherMaster or Slave. Slaves of different Auto Multi-PCs Controller can be mixed in
cascade configuration.
Master Unit
POWER
POWER
PROGRAM
PROGRAM
PC1
PC1
PC2
PC2
PC3
PC3
PC4
PC4
PC5
PC5
PC6
PC6
PC7
PC7
DC 5V
DC 5V
Stage Unit
POWER
POWER
PROGRAM
PROGRAM
PC1
PC1
DC 5V
DC 5V
Stage Unit
POWER
POWER
PROGRAM
PROGRAM
DC 5V
DC 5V
VI.LIMITED WARRANTY:
1.The product is freely repaired for 1 year since the buying date(according to the invoice
date). If any malfunction appears during daily use, please contact with our customer
department, and show your invoice when repairing.
2.The malfunctions caused by following reasons are not included in freely repairing
1)Parts damage caused by artificial reasons (where is visible physical damage)
2)Product's abnormal working caused by computer virus
3)Parts damage and malfunction which appears during customer's transportation
4)force majeure: abnormal working caused by earthquake, fire, accident(thieved, lost)
etc.
5)Product's abnormal working caused by self programmed software or third party
software.
6)Malfunction or damage caused by poor power environment or object entry inside.
7)Malfunction caused by self disassembly or repairing.
3.No charge is taken for Other equipments' malfunction which is directly or indirectly
caused by this product's malfunction.
PC8
PC8
PCs or next stage Units
PCs or next stage Units
PC2
PC2
PC3
PC3
PC4
PC4
PC5
PC5
PC6
PC6
PC7
PC7
PC8
PC8
PCs or next stage Units
PCs or next stage Units
PC2
PC2
PC3
PC3
PC5
PC5
PC7
PC7
PC8
PC8
PC1
PC1
PC4
PC4
PC6
PC6
PCs
PCs
CS08S/ CS16C 8/16 PORT KVM SWITCH
VI.TROUBLE SHOOTING:
The reason for not compatible with Auto Multi-PCs Controller
1.
The BIOS in the mother board. (Basic Input / Output System)
2.
The hardware equipment. (Keyboard, Mouse)
3.
Software, OS (Operating System)
Situation
* Check whether the mouse install mouse driver
* Exchange other mouse (USB mouse only for
user side)
Mouse Hanged
* Connect the mouse to PC directly
* Exchange the PC port
* Try to select other port and then switch back
* Exchange other Keyboard
* Connect the USB keyboard to PC directly
Keyboard Hanged
* Exchange the PC port
* Try to select other port and the switch back
* Do not move keyboard, mouse or select PC
of the initial turn-on operation procedure is not
completed Adjust the dip switch
Improper Operation
* Reboot after the PC is turned off for 5 seconds
later
* Try to select other port and then switch back
© Datasheen Corporation. 2011. Taiwan
Solution
CS08S/ CS16C 8/16 PORT KVM SWITCH