DVDO EDGE Suplemento ao Manual do Produto - Página 7
Procurar online ou descarregar pdf Suplemento ao Manual do Produto para Conversor de multimédia DVDO EDGE. DVDO EDGE 16 páginas. Dvdo edge high definition video processor & hub
Imprimir páginaUpdating EDGE Firmware using a Macintosh Computer
The Macintosh installer with work with MacOS versions
For MacOS 10.4 and later versions.
1. Download the Mac version of the EDGE firmware onto your computer.
2. Double click on the icon; a new icon named "DVDO EDGE Updater vxxx" should appear. This is the updater application.
3. Connect the Mini-USB to USB cable; the large end connects to your computer and the small end connects to EDGE.
4. Power up EDGE if it is not already.
5. Using your paperclip Reset tool, press the RESET button on EDGE and hold it until the front LED stops flashing and remains steady on.
This takes about 5 seconds.
6. An EDGE icon should appear on your Mac's desktop. EDGE looks like a mass storage device to your Mac.
7. Double click on the DVDO icon. A status window will appear on your desktop. The window will automatically disappear when the update
process is finished. The EDGE icon will also disappear.
8. Unplug the USB cable. This will reset EDGE and when it comes out of reset, it will be running the new firmware.
After coming out of RESET, EDGE will be in a factory default state, which means that EDGE will run the setup Wizard. So, the first thing you
will see is the Wizard screen. You can either use the Wizard to restore your settings, or press the LEFT arrow button on the remote to exit
the Wizard.
You can verify that the new firmware is running by pressing the INFO button and using the arrow button on your remote to get to the firmware
version page.
7