Aussie Pumps AB Scud 30 Manual de instruções do operador - Página 16
Procurar online ou descarregar pdf Manual de instruções do operador para Bomba de água Aussie Pumps AB Scud 30. Aussie Pumps AB Scud 30 16 páginas. Stainless steel frames, 3,000/4,000 psi
Também para Aussie Pumps AB Scud 30: Manual de instruções do operador (16 páginas)
Imprimir páginaAussie Pumps
OVERSPEEDING
Do not operate machine at over 3200rpm
(engine speed). Over speeding can cause
serious pump damage.
EXCESSIVE BYPASS
Do not run on excessive by-pass. Switch
machine off within five minutes of ceasing
operation as excessive by-pass can cause heat
build up in pump and subsequent damage.
Excessive bypass running voids warranty.
PRESSURE CLEANER DAILY CHECK LIST
Check pump oil level
Check engine oil level
Check nozzle for wear
Check all high pressure components for leaks:
gun/lance
HP hose
all fittings
Check water filter and clean regularly
Check unloader, safety valve and thermal
dump for leaks
LOOK AFTER YOUR MACHINE AND IT WILL LOOK AFTER YOU!
MACHINES NOT REGULARLY SERVICED WILL AUTOMATICALLY VOID WARRANTIES
Aussie Accessories ... save time, save $$$, save water
16
WARNINGS
Australian Pump Industries Pty Ltd
7 Gladstone Road, Castle Hill NSW 2154
Ph: (02) 8865 3500 Fax: (02) 9894 4240
www.aussiepumps.com.au [email protected]
Aussie AB Scud Cadet Series ... Operation & Maintenance Manual
HIGH PRESSURE SETTING
The high pressure pump is factory set to
operate at its rated pressure. DO NOT ADJUST.
Tampering with the pressure regulator will void
warranty and can be DANGEROUS.
CHECK NOZZLE MONTHLY
If pressure drops off check nozzle for wear.
Nozzles should be replaced on a regular basis
(every month for machines in regular use, every
three months for machines used
intermittently). Using the machine with the
incorrect nozzle size or worn nozzle will void
warranty and can be DANGEROUS to the
operator.
THREE MONTHLY REGULAR SERVICE
All professional machines need to be thoroughly
serviced every three months. The service involved
should
include
the
recommendations (see separate Engine Manual)
and the following;
Change pump oil
Check filter for foreign debris
Check unloader, safety valve and thermal
dump for leaks
Check all HP components for leaks: Gun/lance,
HP hose and all fittings
Replace nozzles
March 2018
engine
manufacturer's