DVDO DVDO-C3-1 Manual de instruções

Procurar online ou descarregar pdf Manual de instruções para Câmara de segurança DVDO DVDO-C3-1. DVDO DVDO-C3-1 7 páginas. Tracking function

DVDO-C3-1 Tracking Function Instructions

Introduction

DVDO-C3-1 camera analyzes movements and faces and adjusts its position based on settings. The following

configuration is ideal for teaching or presentation purposes.

Language Selection

Connect the camera's HDMI output to a display, then press *, #, 1 keys in sequence on the remote to select English, or

press *, #, 3 for Chinese. Check the on-screen display (OSD) language by pressing [Menu] on the remote.

Note: please exit OSD by pressing [Menu] again before changing the language. OSD language selection can also be

performed within the OSD menu under Setup. Once the camera is connected, its web UI language can also be selected

on the bottom left of the UI screen.

Network Setup

The network can be set up in two ways. The factory default IP setting is (192.168.100.82). The current IP setting can be

obtained by connecting the camera's HDMI output to a display, then pressing the * # 4 keys on the remote.

Network Setup Method 1 – Connecting Camera Directly to PC via Ethernet Cable

Web Interface Home Screen

Once camera IP address is verified, launch web browser (Internet Explorer preferred) and enter the camera IP address*.

Reminder: Connect camera directly to computer via Ethernet Cable

Input username and password to enter web interface. (Note: Default login is user: admin / password: admin) (See

instructions "In case.." below if IP address is outside of network IP range)

Reminder: Language selection is at the bottom left of window.

In the web interface, click on [Network] on left-side menu bar of home screen to make changes in the Network Screen.

Click [Apply] then restart the camera by clicking [System] and [Reboot] under the [Initialize] option. The camera may

also be restarted using the rear power switch.

*In case 192.168.100.82 is not responsive, it may be necessary to update your PC's IP address to match the camera's

gateway.

•

Open the Control Panel and access "Network and Internet", then "Network and Sharing Center."

Select "Change adapter settings" on the left-hand navigation bar.

•

Double click on "Ethernet" to open the dialog box and open Properties for IPv4:

•

DVDO

Network Screen

DVDOC3TRACK_V1.0