DVDO DVDO-Xtend-TX100 Manual do utilizador - Página 16

Procurar online ou descarregar pdf Manual do utilizador para Transmissor DVDO DVDO-Xtend-TX100. DVDO DVDO-Xtend-TX100 19 páginas. 3 x 1 hdbt wall-plate transmitter

Imprimir página

DVDO-Xtend-TX100 3 x 1 HDBT Wall-plate Transmitter User Manual

DVDO Product Configuration Tool

The transmitter supports configuration through the "DVDO Product

Configuration Tool".

Connect the HDBT OUT of the transmitter and your receiver HDBT IN, the

transmitter can be powered by receiver via Cat X cable.

Use the Micro USB-B to USB-A cable provided to connect the transmitter

UPDATE port and your PC USB port. Or connect a PC to RS232 port of

receiver.

Check which port on the computer the cable is connected to in the device

manager.

Copy the "DVDO Product Configuration Tool" to local file.

Run the tool, and set the connection parameters correctly before sending

any commands to the transmitter.

Select right port from the drop-down menu, and set the baud rate, then

press Connect. Once connected you can set the RS232 output port

commands and the relay mode.

Note: When connect the PC via UPDATE port of the transmitter, the Baud

Rate is fixed according to the transmitter, and connect PC via RS232 port

of Receiver, you can set baud rate.

DVDO-Xtend-TX100_V1.0 0

DVDO