Aussie Tonneaus ATR01132 Instruções de montagem - Página 3
Procurar online ou descarregar pdf Instruções de montagem para Acessórios para automóveis Aussie Tonneaus ATR01132. Aussie Tonneaus ATR01132 4 páginas. Hilux single cab 1989 - 2005 continuous rope tonneau cover
Imprimir página
2. CARING FOR YOUR TONNEAU
Apply bee's wax or Dri-lube to stitching a few times a year, as this will maintain the tonneau's
-
waterproofing ability and prevent the stitching from degrading. Use a mild detergent and soft
scrubbing brush to clean tonneau.
-
Never drive without tonneau support bars in place as flapping can cause a delaminating effect
on the material.
"Tonneau is not designed to be used as a load restraint"
3. MULTI-FIT SUPPORT BAR
The Aussie Tonneau Multi - Fit Support Bar is designed to fit almost all Utes
on the Market, from Suburu Brumbys to Cab Chassis aluminium trays.
3.1 BASIC TOOL REQUIRED
Drill, 4mm drill bit
-
3.2 MULTI-FIT SUPPORT BAR CONTENTS
-
1 x hollow bar centrepiece
-
2 x solid bar end piece
3.3 FITTING MULTI-FIT BAR
-
2 x grub screws
Figure 4
Thread Rope through
each of the eyelets