Datavideo DAC-91 Manual de instruções - Página 13

Procurar online ou descarregar pdf Manual de instruções para Conversor de multimédia Datavideo DAC-91. Datavideo DAC-91 20 páginas. Sdi audio embedder
Também para Datavideo DAC-91: Manual de instruções (17 páginas)

Imprimir página

6. To check if the update is successful:



Set DIPSW 2-4 to a setting other than 111 or 110, for example, you can

set DIPSW 2-4 to 000.



Connect the DC 12V power and the PWR LED will be turned ON.



After 7 seconds, the Audio LED will be turned ON and then faded out,

indicating that the device is functional and the update is successful.

Firmware 2 Update Procedure

1. When power is not connected, set DIP SW 2-4 to 111 as shown in the

diagram below:

2. Connect the DC 12V Power:

PWR LED will be turned ON and the device will enter the Firmware 2 update

mode.

3. Connect the PC via mini-USB port and the "Removable Disk" dialogue box

will appear on the PC (if the device is connected to the PC for the first time,

you will then see a "DAC-91 Datavideo FW2 USB Drive" prompt appearing

at the bottom right corner of the screen). The disk name is DAC91FW2XXX