Datavideo TP-600 Manual de instruções - Página 11
Procurar online ou descarregar pdf Manual de instruções para Acessórios para vídeo profissional Datavideo TP-600. Datavideo TP-600 16 páginas. Eng prompter
Imprimir página
PROMPTER KIT FOR ENG CAMERAS
Cleaning the 60/40 Glass
This product contains a sheet of 60/40 glass please handle it with care.
To avoid a risk of damage or injury please follow this instruction manual and use caution
when transporting, un-packing, cleaning, assembling or dis-assembling this part of the
product.
Datavideo recommend cleaning the glass regularly to remove dust and finger print marks.
This will ensure the best image quality is recorded when the camera is looking through the glass.
Never attempt to clean the glass whilst it is mounted in the prompter instead remove it carefully from the
prompter, clean the glass and then re-install it into the prompter frame. Handle the glass carefully using the
cloth covered edges of the glass at all times.
To retain the required qualities of the glass and to avoid scratching the glass during cleaning.
•
Never use abrasive cloths, pads or abrasive based cleaning fluids on the glass.
•
Never use cleaning fluids based on an acid or vinegar solution.
Place the glass on a soft, stable, dirt and lint free work
surface such as a table with a clean cloth already laid out
on it. Then use a second clean, lint free, soft cloth to
clean the glass.
Do not apply cleaning fluids to the glass directly, instead
apply or spray a small amount of the cleaning fluid onto
the cloth. Proceed to clean the glass and work in a light
circular motion with the cloth. Ensure all finger marks and streaks are gone before turning the glass over and
repeating with the other side.
Once finished re-install the glass back into the prompter hood, again using the cloth covered edges only.
Ensure the green circle sticker on the glass is facing you and the red circle sticker is facing the camera
lens. Reseat/secure the camera hood if necessary.
11
TP-600