ADE PFA Series Manual de instruções - Página 11
Procurar online ou descarregar pdf Manual de instruções para Balanças ADE PFA Series. ADE PFA Series 15 páginas. Electronic precision scale
Imprimir página
Selection of transmission way
This function is active while the balance is connected
with printer, computer and the relative equipment.
Press PCS to choose the number of 1-8 and then
press PRN to save or exit.
Press UNIT to go to the next function mode selection.
This function is activated, when scale is connected with
printer or PC.
Explanation:
In weighing mode
1. Continuos transfer mode
2. Stable transfer mode
3. Serial print key transfer mode
4. Serial print stable transfer mode
Presetting of baud rate BPS (optional)
In this parameter speed of communication can be setted.
Press PCS for selecting baud rates „9600", „4800",
„2400" und „1200".
Then press PRN to store and leaving.
Press the UNIT-button to save the presetted value
and change to the next step.
Backlight
Start the presetting mode as described before.
Press the UNIT-button until correspondent menu appears.
Press the button PCS, to activate or deactivate the backlight.
ON means active, OFF means deactive function.
Press the UNIT-button to save the presetted value and
change to the next step.
Presetting of weighing units
You may chosse between 13 different weighing units.
The scale can be presetted that only required units will be shown.
Therefore you may activate or deactivate weighing units which
are not required.
Start the presetting mode as described before.
Press the UNIT-button until correspondent menu appears.
Press the button PCS, to activate or deactivate the weighing
units.
ON means active, OFF means deactive function.
Press the UNIT-button to save the presetted value and change
to the next step.
While choosing a weighing unit only activated weighing units
will be available.
PFA-200702-Rev004-UM-en
In counting mode
5. Continuos transfer mode
6. Stable transfer mode
7. Serial print key transfer mode
8. Serial print stable transfer mode
10