ADE PFA6000 Manual de instruções - Página 4
Procurar online ou descarregar pdf Manual de instruções para Balanças ADE PFA6000. ADE PFA6000 15 páginas. Electronic precision scale
Your ADE Precision Scale is a quality product.
In order to achieve precise results please kindly read and follow the Operation Manual in all
respects.
Keep this Operating Manual careful to have this information on hand whenever you need it.
Check scope of delivery
Precision Scale
Weighing platform
Power Supply
RS232-cable (if ordered)
Windshield dismantled (only model PFA1000)
Operating Manual including Declaration of Conformity
Mains and battery operation of the scale
The power supply is raised either through mains operation by the provided mains adapter 230V
alternating current or through the batteries 6x 1,5V AA (LR6) (not included in this delivery).
a) Mains operation
Connect the supplied mains adapter with the scale. Plug in the pin into the connecting socket
on the backside of the scale housing, which is side next to switch for on and off switching on the
right hand side of the scale.
Connect the mains adapter with the local power supply.
b) Battery operation
Open the battery case at the bottom of the scale.
Insert the batteries (6x 1,5V LR6 – not included in delivery).
As soon as the voltage of the power supply is not enough anymore for operation (less than 5.7V), it
will be indicated by an accordant illustration of a battery symbol
mains adapter must immediately get connected to the local power supply and charged through the
supplied mains adapter.
The batteries should be exchanged against new, unused uniform batteries.
In case the voltage decreases fewer than 5.5 V the scale cannot be used in battery operation.
If the scale will not be used for a longer time please remove the batteries to avoid a damage of the
scale because of possible leaking of batteries.
3
INSTALLATION AND COMMISSIONING OF THE SCALE
Before connecting the mains adapter, it is essential to control whether
the imprinted voltage value on the adapter corresponds with the local
voltage.
Should the local voltage not correspond with the imprinted value the
scale must not get connect!
in the display and the
PFA-200702-Rev004-UM-en