Dateq MusiCall MPM8.16 Manual do utilizador - Página 19
Procurar online ou descarregar pdf Manual do utilizador para Misturador de música Dateq MusiCall MPM8.16. Dateq MusiCall MPM8.16 20 páginas.
Imprimir página
MusiCall user manual
EN
Configuring the system
The console can change almost all of the system settings. The system has to be
configured to allow the programming mode from the specific console. The program
function can be enabled or disabled for each console separately.
Accessing the program menu
Push-and-hold the 'P' key.
The program menu shows on the
display. Keys A and B can be used
to scroll through the various
programming options. To select an
option press the 'E' key.
Room combining
This option combines two or more zones. The red lights indicate the master zones,
the green lights indicate the slave zones.
An un-combined zone can be made master simply by pushing the zone-key (1...8).
The light illuminates red. Slaves can be added by pushing the zone-keys. These
lamps light up green.
Push the 'P' key to end the room-combining mode and return to the main
programming screen, or push the selected master zone to assign another master
zone.
Existing master-slave zones can be changed very easily by selecting the master
zone. The slaves light up green. Slaves can be added or removed by pushing the
zone-keys (1...8).
!
• A zone can be belong to only one master zone.
• When two or more zones are combined the audio-source of the slaves will
immediately change to the master source.
• Slave zones can only adjust their volume. When the master zone increases or
decreases the volume the slave zones will follow the master.
• When the master zone switches to it's local input, the slaves will switch to the
local input of the master.
Assigning groups
Groups A and B can be assigned here. The green lamp in the A or B key indicates
the group that is being configured. The lamps in the zone keys will light up green
when a zone belongs to this group, and red when it doesn't belong to the group. By
pushing the zone-button the group status of the zone is toggled on and off.
When key A or B is pressed the other group can be configured.
!
• When the groups are assigned the slave zone will follow the master status. When
a master is included to a group the slave zones will automatically be included.
• Slave zones of a master that doesn't belong to the group will light up red, even
when the slave zone is included to the group.
• When a slave zone is pushed the group-status will be updated in the system, but
the console will not display the new status. When the master-slave combining is
removed the new status will be made active.
---Program mode---
••••••••••••••••••••
P
••••••••••••••••••••
Config outputs
••••••••••••••••••••
Room combining
••••••••••••••••••••
Assign groups
E
Configuration
8
A
B