Dateq Musicall MAX8.16 Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Amplificador Dateq Musicall MAX8.16. Dateq Musicall MAX8.16 12 páginas.

MusiCall user manual

Consoles

Paging zones

Each button contains a zone or number off

zones that can be changed using the

configuration website. On addressing a

zone, the LED turns red. At this point the

'chime' is heard. On the LED turning

green, a voice call can be made. On

releasing the zone button the zone returns

in the state it was before paging started.

• In case room combining is active and a slave zone is addressed but not the

master zone paging will not be active in that specific slave zone.

• In case room combining is active and a master zone is addressed all slave zones

will be addressed too.

• Paging to a zone will always be active even when a zone is set to silence.

• Paging will not be active when a system mute by fire alert or evacuation is active.

Adjusting configuration

Using the console group paging can be set and adjusted. Programming through the

paging console only groups A, B, C and D are available. Groups 1...8 or 1...16 can

only be changed using the configuration pages. By default these groups are set to

zone 1...16.

Entering the programming menu.

Press the 'P' key to enter the programming menu.

The programming screen will appear. By default the programming menu will start in

group 'A'. Select the group that needs to be changed.

In programming mode the buttons 1...16 indicate all zones. The green LED's indicate

the active zones in the selected group. Zones can be added by pressing the zone

buttons 1...16. In case a zone is selected stereo both zone outputs are automatically

selected when adding the zone. Selected zones and groups are automatically saved

into the matrix configuration.

Existing paging groups can later on easily be changed by pressing one of the group

buttons. All zones within the selected Group will light up green. By pressing the

buttons 1...16 zones can be added or removed.

• A zone can be selected to one or more groups.

• Paging groups are automatically stored.

• Groups 1...16 can only be changed using the internal configuration webpage.

• Paging to the master of room combined zones are active in slave zones too.