Dw Drums DW 9710 Manual do Proprietário

Procurar online ou descarregar pdf Manual do Proprietário para Racks & Stands Dw Drums DW 9710. Dw Drums DW 9710 2 páginas. Cymbal stand

Imprimir página

DW 9700 CYMBAL STAND

Remove the stand and all packing materials from the box, then follow these instructions to set up and adjust your stand to fi t the way you play.

Section 1: Leg Assembly and Base Section Adjustments

Section 1.1: Leg Assembly

1. Loosen wingscrew on the clamp at top of base section.

2. Pull legs outward far enough to allow the clamp to contact memory lock.

3. Tighten wingscrew.

To open or close the legs, loosen the drumkey screw on the leg memory lock located on

the bottom tube section. Loosen the wingscrew on the clamp at top of base section and

adjust the tripod to achieve the desired position. Then tighten the clamp and memory

lock screw.

Section 2: Height Adjustments

Section 2.1: Tube Sections and Receivers

1. Loosen the memory locks and wingscrews on tube receivers.

2. Raise or lower the upper or middle tubing sections to the desired position.

3. Tighten memory locks and wingscrews on tube receivers.

Section 3: Boom Arm Adjustments

Section 3.1: Straight/Boom Casting

DW's Straight/Boom Casting utilizes an exclusive double-sided clamp with one side used

to adjust the distance and balance of the arm and the other controlling its angle. This

casting is also designed to allow the stand to be converted from a boom to a straight

stand by positioning the angle of the arm so that it is vertical and then telescoping it

through the casting and into the top of the upper tube section. To adjust either one of

the positioning adjustments, loosen the respective wingnut on the clamp, position the

arm as desired and retighten the wingnut.

Section 3.2: Boom Arm

1. Loosen the drumkey screw on the boom arm memory lock.

2. To adjust the distance of the arm, loosen the distance clamp wingnut and position

the arm as desired.

3. Tighten the distance clamp wingnut.

4. Move the boom arm memory lock so that it interlocks with the notch in the top of

the straight/boom casting and tighten the drumkey crew on the memory lock.

Section 4: Tilter and Cymbal Space Adjustments

Section 4.1: Tilter

1. Loosen the TechLock™ on the tilter section.

2. Loosen the Position Reset Handle.

Note: The Position Reset Handle is spring activated. To operate, grasp the handle with

your fi ngers and use your thumb to press on the button in the center of the handle

while pulling the handle away from the tilter. Reset the handle to a more comfortable

position and release.

3. Adjust the angle of the tilter and retighten the Position Reset Handle and TechLock.

Section 4.2: Cymbal Space Adjustment

1. Loosen the drumkey screw on the cymbal seat/cymbal space mechanism.

2. Spin the mechanism to open or close the amount of space between the upper and

lower cymbal felts and the cymbal. Be careful to leave some slack in the spacing as this

will allow the cymbal to sound fuller and prevent cracking.

3. Adjust the angle of the tilter and retighten the Position Reset Handle and TechLock.

Section 4.3: Drop-Resistant Wingnut

The contoured wingnut and cymbal stem feature a drop-resistant design for faster set up

and pack up as well as increased security. To remove the wingnut, gently spin it coun-

terclockwise. To replace the wingnut, spin it clockwise so that it securely contacts the

cymbal sleeve.

Section 5: Memory Labels

Section 5.1: Memory Labels

Eight sets of Memory Labels are included with each 9700 stand. These labels can be

adhered to the upper portion of each stand section and used to identify the parts of

individual stands when multiple stands are separated for transport.

Tilter (see inset)

Position Reset Handle

Boom Arm

Boom Arm Memory Lock

Convertible Casting

Upper Tube

Tube Memory Lock

Tube Receiver

Center Tube

Tube Memory Lock

Tube Receiver

Base Section

9700

Instructions and parts identifi cations also apply to 9710, 9700L and 9710L stands.















Tilter Section

 Drop-Resistant Wingnut

 Felt Washers

 Cymbal Seat

 Cymbal Space Adjustment

 Universal Angle Adjustment

Universal Angle Adjustment

 Techlock

 Position Reset Handle

Leg Clamp

Leg Memory Lock

Legs