Datum DT3X360G Manual de Instruções - Página 9
Procurar online ou descarregar pdf Manual de Instruções para Nível laser Datum DT3X360G. Datum DT3X360G 12 páginas. 3 x 360 laser level
Imprimir página
CHECKING THE HORIZONTAL LINE
1.
Position the device about 5 m from a wall and switch on the cross laser.
Mark point B on the wall.
2.
Turn the laser cross approx. 2.5 m to the right and mark point C.
3.
Check whether the horizontal line from point C is level with point B to within ± 2 mm.
MAINTENANCE AND SERVICE
•
Do not attempt to open the device. To ensure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment should be performed by authorized service centres.
Contact your dealer for more details.
•
Do not drop, knock or shake the laser level as this will affect precision.
•
Remove batteries when the device is not in use.
•
Keep the laser level clean at all times. Use a soft lint-free cloth for the body and lens tissue
for glass windows. Do not use abrasive cleaners or solvents.
•
Don't expose the laser level to high temperatures or humidity.
•
Do not store the laser level in the hot areas, hot temperatures can short the life of
electronic device, damage battery, and warp or melt certain plastics
•
Do not store the laser level in the cold areas. When the unit warms up to its normal
operating temperature, moisture can form inside where it may damage circuit board.
•
Avoid shock, vibrations and extreme heat.
•
Do not immerse the instrument in water.
•
Always slide the power switch to the OFF position when storing, transporting or moving
around the job site.
•
Calibration is recommended at least once a year or as needed.
OPERATING MANUAL
9