Cookshack SmartSmoker 360 Manual do operador - Página 7

Procurar online ou descarregar pdf Manual do operador para grelha Cookshack SmartSmoker 360. Cookshack SmartSmoker 360 17 páginas. Smartsmoker oven

800.423.0698

Your Cookshack Model 350/360 has the new Cookshack IQ3 control system. This controller has the same great

cook & hold features as the previous models of the IQ controller, but with an additional feature that allows you to

cook with a meat probe. This optional probe plugs into the unit and allows you to set the internal temperature to

which you want the product cooked. If you did not purchase the meat probe with your unit, call Cookshack Cus-

tomer Service at (800) 423-0698 to order your probe.

6. If using the Probe Mode, set probe temperature by pressing and holding the PROBE TEMP button while using

ADJUST TIME OR TEMP buttons to change settings.

7. Press START.

To use the meat probe, simply insert the jack into the covered RCA receptacle on the controller panel. Place the

probe end through the vent hole on the oven top and press into the largest piece of meat in the smoker oven. The

oven will cook at the set cooking temperature until the internal temperature of the meat reaches the temperature at

which the probe is set. At that point the controller will change to the set holding temperature and remain there until

the unit is manually shut down. An audible signal indicates that the cook cycle is complete and that the oven is

going to the Hold Temperature Mode.

If cooking in the default Cook Mode the smoker will cook the product at the selected cooking temperature for the

selected cooking time and then change to the selected holding temperature until it is shut off manually.

During the Cook Mode the LCD display of the IQ continually displays oven status after the cook cycle has been

started. Using these features any kitchen staff can easily determine the status of the load in progress.

Please note that the oven temperature displayed while the oven is running is the actual air temperature inside the

oven. The probe temperature displayed is the internal temperature of the product. In order to see the set cooking

temperature, probe temperature, or holding temperature, press the corresponding button.

Cookshack Model 350/360 SmartSmoker Oven

www.cookshack.com

Setting the Cooking Temperature

1. Turn Master Switch ON.

2. Choose the desired mode by pressing the MODE button while si-

multaneously pushing the up or down arrow until the desired mode

flashes: Cook Mode for standard operation, which automatically

drops into the preset hold temperature after the preset cooking

time is reached; Probe Mode if cooking with the optional meat

probe. The default mode is Cook Mode.

3. Set cooking temperature by pressing and holding the COOK

TEMP button while using the ADJUST TIME OR TEMP buttons

to change settings.

4. Set holding temperature by pressing and holding the HOLD

TEMP button while using the ADJUST TIME OR TEMP buttons

to change settings.

5. If using the Cook Mode, set cooking time by pressing and holding

the COOK TIME button while using the ADJUST TIME OR

TEMP buttons to change settings.

Ver. 06.2