BENDIX MC-11 TRACTOR ANTILOCK Manual
Procurar online ou descarregar pdf Manual para Peças para automóveis BENDIX MC-11 TRACTOR ANTILOCK. BENDIX MC-11 TRACTOR ANTILOCK 20 páginas. Tractor antilock
Imprimir página
®
Bendix
MC-11
®
™
DELIVERY
FIGURE 1
DESCRIPTION
The Bendix
MC-11
tractor antilock assembly is designed
®
™
to improve vehicle stability by reducing wheel lock-up during
aggressive braking. Like the MC-10
it replaces, the MC-11
™
one-channel system–it uses one modulator. And the system
can control single or tandem axles. The antilock assembly
mounts to the vehicle frame and usually replaces the drive
axle service relay valve.
The MC-11
tractor antilock assembly consists of an EC-11
™
electronic controller and an M-12
controller houses the electronics that regulate the antilock
system. The electronics are protected by a self-healing
silicone compound. The EC-11
diagnostic window and reset switch, and its 14 pin connector
is the electrical link to the rest of the antilock system. (See
Figure 2.) The controller mounts to the modulator with four
cap screws, and it is electrically connected to the modulator
Tractor AntiLock
14-PIN
CONNECTOR
CONTROL
antilock assembly that
™
tractor antilock assembly is a
™
modulator. The EC-11
controller contains a
™
LED DIAGNOSTIC
DISPLAY
SUPPLY
with a four-pin connector. The M-12
components: solenoids, which rapidly apply and exhaust
air during an antilock stop, and a standard relay valve. (See
SD-13-4772 for more information on the M-12
The air connections for the MC-11
are as follows:
AIR CONNECTION
™
™
Supply
(to reservoir)
Delivery
(to brake actuator)
Control
(to rear service brake valve delivery)
EC-11
™
CONTROLLER
M-12
™
MODULATOR
DELIVERY
™
modulator has two
modulator.)
™
™
tractor antilock assembly
EMBOSSED
IDENTIFICATION
SUP
DEL
CON
1