BENDIX Intellipark Manual do operador - Página 5

Procurar online ou descarregar pdf Manual do operador para Acessórios para automóveis BENDIX Intellipark. BENDIX Intellipark 8 páginas. Electronic parking brake control system bus/non-towing vehicles

Imprimir página

Driver Assistance Features

Rollaway Mitigation

The rollaway mitigation feature is intended to mitigate possible rollaway accidents

by automatically setting the parking brakes when the Bendix

Intellipark

Electronic

Parking Brake (EPB) system detects that the driver does not have control over the

vehicle and it is not parked.

The system will determine the driver does not have control when the vehicle speed is

stationary, the accelerator pedal not pressed, and the foot brake is not being applied.

In that scenario, the rollaway mitigation feature can engage after a few seconds (up

to 30 seconds) and automatically park the vehicle.

Smart Unpark

™

At vehicle startup, once the brake pedal is depressed and the ignition power is on,

the driver can unpark the vehicle by pushing the parking brake switch. NOTE: The

vehicle will not unpark if the door is open. For electric vehicles, the vehicle will not

unpark if the charging cable is plugged in.

Rollaway Mitigation Acknowledgement

If the rollaway mitigation feature is

activated, both LEDs will continuously

blink. The LEDs will continue to blink until

the driver pulls the parking brake switch.

Releasing the parking brakes will not be

possible until the driver pulls the parking

brake switch.

Exhaust/Park-at-Speed

In an emergency situation, the Intellipark EPB system can help the driver achieve a

stop when service brakes are not available. Pull the parking brake switch until the

spring brakes have been applied. Once an Exhaust/Park-at-Speed event has been

initiated, if the driver stops pulling the parking brake switch at speed, the spring

brakes will release.