dymax ECE ZIP Shutter Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de iluminação dymax ECE ZIP Shutter. dymax ECE ZIP Shutter 20 páginas. For use with dymax ece flood lamp systems

Imprimir página

Dymax ECE ZIP™ Shutter User Guide

ECE 2000 Flood Lamps

NOTE: If the ZIP Shutter and Lamp Assembly are NOT installed into a Light Shield, the Glass Containment Shield

must be installed.

1. Install the Glass Shield (if applicable) (Figure 10).

2. Install the ECE 2000 Mounting Plate on the base of the ECE 2000 Lamp Housing (Figure 11) by installing

the M4 x 8 mm screws.

3. Install the Glass Shield (if applicable).

Figure 10. Reflector Housing with Glass

Shield Installed

4. Install the Lamp Housing Assembly into the ZIP™ Shutter and attach it with four M4 x 8 mm screws

(Figure 13).

NOTE: One side of the Mounting Plate has a third screw hole (Figure 12). When in the correct position, this

screw hole will be at the rear of the Shutter.

Figure 12. Lamp Housing Assembly

Figure 11. Lamp Housing with

Mounting Plates Installed

Figure 13. ECE 2000 Lamp Housing

Assembly Installed with M4 x 8 Screws

Third Screw Hole

Four M4 x 8 screws (two located on opposite side)