dymax 110 Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Unidade de controlo dymax 110. dymax 110 20 páginas. Spray valves

Dymax Model 110 & 210 Spray Valves User Guide

Maintenance and Cleaning

Lubricate the Packing (E) on the valve every 200 hours by placing a few drops of mineral

oil or other light oil inside the Packing Nut (F).

The Packing Nut (F) will require occasional tightening as wear occurs in order to prevent

leaks through the Packing (E).

Cleaning and rebuilding the valve will be required from time-to-time. A spare parts kit is

available with all the normal wear parts included. Refer to Figure 1 for part reference

designation.

Begin disassembly by removing air and fluid pressure from the valve.

Remove all pneumatic tubing and fluid delivery fittings, hoses, etc. from the valve.

Loosen the Packing Nut (F) by using the tip of a 3/32" Allen key.

Remove the two Machine Screws (Q) located on the same corners as the Standoffs

(G) with a 3/32" Allen key.

NOTE:

During removal, the valve's Spring (T) will force the air section away from

the fluid section.

Pull the Air Section (M, I) away from the Fluid Section (D).

Clean off the tip of the stainless steel Needle (C).

Unthread and remove the Packing Nut (F) and Packing (E) from the fluid section (D)

of the valve.

Using soft tip pliers unthread and remove the two Standoffs (G) from the fluid

section (D).

Unthread and remove the Collar Ring (R) followed by the Air Cap (A).