Dymo COLORPOP Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Fabricante de etiquetas Dymo COLORPOP. Dymo COLORPOP 11 páginas.
Imprimir página
About Your New Printer
With the DYMO COLORPOP! printer, you can create a
wide variety of high-quality, self-adhesive labels. You can
customize your labels using many different font sizes, font
styles, emojis, and symbols. The printer works best with
DYMO COLORPOP! 1/2" (12 mm) label cassettes. Labels
are available in a wide range of colors.
Visit
www.dymo.com
for information on obtaining labels
and accessories for your printer.
Registering Your Printer
Visit www.dymo.com/register to register your printer
online.
Register your printer to receive these benefits:
Notification of availability of upgrades by email
Special offers and new product announcements
During the registration process, you will need the serial
number, which is located inside the back cover of the
printer.
General Safety Precautions
Follow the guidelines in this section to use this product
safely.
Batteries/Power Adapter
Use only alkaline batteries.
Do not mix different types or brands of batteries.
Make sure the batteries have the same expiration
dates.
Use only DYMO-branded power adapter.
Do not handle power adapter if your hands are wet.
Do not cut, damage, alter, or place heavy objects on
the power adapter.
Do not use the power adapter if it is damaged.
Label Printer
Do not insert objects into or block the label exit slot.
Do not touch the cutter blade. Personal injury could
result.
Do not allow any liquids to come into contact with the
printer.
Do not disassemble the printer. For inspection,
adjustment, or repair, contact DYMO Customer
Support (http://support.dymo.com).
DYMO Label Cassettes
Use only DYMO-branded label cassettes in this
printer.
Do not use any unauthorized accessories or supplies.
Clean the surface before applying the adhesive label
or the label may not adhere correctly and could peel
off easily.
Do not expose the labels to extreme heat or sunlight.
Getting Started
Follow the instructions in this section to print your
first label.
Connecting the Power
The printer is powered by alkaline batteries or an
optional AC power adapter. To save power, the
printer automatically turns off after two minutes of
inactivity.
Inserting the Batteries
The printer is powered by six AAA alkaline batteries.
To insert the batteries
Press the thumb latch on the back of the printer to
1
remove the battery compartment cover.
Insert the batteries following the polarity markings
2
(+ and –).
Replace the battery compartment cover.
3
Remove the batteries if the printer will not be used for
a long period of time.
Connecting the Optional Power Adapter
An optional 9 Volt, 2 A power adapter can be used to
power the printer. Connecting the power adapter to
the printer disconnects the batteries as a power
source.
To connect the optional power adapter
Plug the power adapter into the power connector on
1
the top of the printer.
Plug the other end of the power adapter into a
2
power outlet.
Inserting and Removing the Label Cassette
Your printer works best with DYMO COLORPOP! label
cassettes. Visit
www.dymo.com
purchasing additional label cassettes.
To insert the label cassette
Lift the label cassette cover to open the label
1
compartment.
3
Press thumb
latch to open
for information about