Dymo LabelWriter 450 Turbo Manual de início rápido - Página 6

Procurar online ou descarregar pdf Manual de início rápido para Impressora Dymo LabelWriter 450 Turbo. Dymo LabelWriter 450 Turbo 10 páginas. How to order and insert a roll of labels in the dymo labelwriter
Também para Dymo LabelWriter 450 Turbo: Manual de início rápido (20 páginas), Manual de início rápido (14 páginas), Visão geral (2 páginas), Manual de configuração (11 páginas), Manual do utilizador (19 páginas), Manual de instalação (4 páginas), How-To Manual (3 páginas)

4. Loading Labels

To load a label roll

Press the form-feed button to eject the labels that

protected the printer during shipment.

Open the top cover and remove any packing

material inside the label compartment.

Remove the label spool from inside the cover.

Hold the spool spindle in your left hand and place the

label roll on the spindle so that the labels feed from

underneath and the left edge of the label roll is flush

against the side of the spool. See Figure 7.

Place the spool guide onto the right side of the spool

and press the guide tightly against the side of the

label roll, leaving no gap between the roll and the spool. See Figure 7.

The label roll must fit snugly against both sides of the

NOTE

label spool, with no gaps, to avoid drifting as the labels feed

through the printer.

Insert the label spool into the slot in the printer cover with

the labels extending from underneath the roll. See Figure 8.

PAGE 6 OF 10

H-1265

Spool

guide

spindle

Figure 7

Figure 8

1013 IH-1265