Dymo RhinoPRO 3000 Manual de instruções - Página 12

Procurar online ou descarregar pdf Manual de instruções para Impressora Dymo RhinoPRO 3000. Dymo RhinoPRO 3000 17 páginas. Label printer
Também para Dymo RhinoPRO 3000: Brochura e especificações (2 páginas), Ficha de dados (2 páginas), Início rápido (2 páginas), Referência rápida (2 páginas)

Imprimir página

Cleaning Your Printer

Your printer is designed to give you long and

trouble-free service, while requiring very little

maintenance.

Clean your printer from time to time to keep it

working properly. Clean the cutter blade each time

you replace the label cassette.

To clean the cutter blade

1. Remove the label cassette.

2. Place the tip of a ball-point pen or pencil on the

L-shaped piece as shown in Figure 13, and

press the piece down.

Press and hold

cutter lever

Figure 13

3. While holding the L-shaped piece down, press

and hold the cutter lever to expose the cutter

blade.

4. Use a cotton ball and alcohol to clean both sides

of the blade.

5. Release the cutter lever.

To clean the print head

Clean the print head using the cleaning tool

♦

located inside the tape compartment lid.

You can also use the optional cleaning pen to clean

the cutter blade and print head.

Press down

and hold