Dymo LabelWriter 450 Duo Label Printer Manual de início rápido - Página 7

Procurar online ou descarregar pdf Manual de início rápido para Software Dymo LabelWriter 450 Duo Label Printer. Dymo LabelWriter 450 Duo Label Printer 20 páginas. Labelwriter series label printers
Também para Dymo LabelWriter 450 Duo Label Printer: Manual de início rápido (20 páginas), Manual de início rápido (16 páginas), Visão geral (2 páginas), Manual do utilizador (19 páginas), Manual de início rápido (8 páginas), Manual do hardware (2 páginas)

4. Loading Labels

The LabelWriter Twin Turbo printer holds two label rolls, so you can print two types of labels

without having to change the label roll. For example, load address labels on one side and

DYMO Stamps postage labels on the other side.

Important!

In order for the labels to feed properly during printing, pay attention to the following when

loading labels on the spool and into the printer:

• The label spool guide must be pushed flush against the label roll, with no gap.

See Figure 6.

• The labels must be loaded with the left edge of the label inserted against the left

edge of the label feed slot. See Figure 8.

To load a label roll

Press the form-feed button to eject the labels that protected the

printer during shipment.

Open the top cover and remove any packing material inside the

label compartment.

Remove the label spool on the left from inside the top cover and

pull the spool guide from the spindle.

Hold the spool spindle in your left hand and place the label roll on the spindle so that

the labels feed from underneath and the left edge of the label roll is firmly against the

side of the spool. See Figure 5.

Spool

guide

spindle

Figure 5